FTIR studies of polyimides. II. Factors affecting quantitative measurement

Measurement of imidization by IR spectroscopy has frequently been reported to give results that are either insensitive to changes in the latter part of the cure or in conflict with observations by other methods. However, an analysis of imide formation using the 1370 cm^?1 band (C? N stretch) in conjunction with the 1500 cm^?1 aromatic band as an internal standard appears capable of giving precise, internally consistent measurements for the most commonly used polyimide structures, for samples that are measured in transmission. Measurements of imide content in ultrathin films by grazing incidence reflection spectroscopy appear to be at least semiquantitative. © 1993 John Wiley & Sons, Inc.     

X—射线荧光光谱测定甜饮料中微量元素

本文提出了低温蒸干和炭化制样Ｘ－射线荧光分析甜饮料中１６种微量元素的方法，试样在电热板上经低温蒸干，于马旨炉中３００℃炭化３０ｍｉｎ，在液压样品成形机上压制成样片进行测定，所测元素不需用任何基体校正，由微机从校正曲线查得含量，榈分析结果与ＩＣＰ－ＡＥＳ和ＡＡＳ法相吻合。     

环境水样中硒形态分析的样品预处理

综述了近几年来测定环境水样中硒的样品前处理方法,主要包括样品消解,加入基体改进剂和分离富集3个方面。消解法中主要使用湿法消解;加入基体改进剂适用于石墨炉原子吸收光谱法的样品预处理,可以提高硒的灰化温度,减少硒的损失以及样品中基体的干扰;固相萃取法是萃取法的主要使用手段。     

Polymer crystallization dynamics,as reflected by differential scanning calorimetry. Part 2: Numerical simulations

With the aid of a model for the kinetics of polymer crystallization, as put forward in previous publications, the shape of DSC-curves and their position on the temperature scale were simulated for various conditions of heat transfer in the apparatus. It turns out that the outcome is very dependent on the assumptions made with respect to these heat transfer conditions. For the ideal condition — no temperature differences between sample, pan and furnace — an invariable shape is predicted for the DSC-curves. They only shift to lower temperatures with increasing cooling rates. For more realistic conditions, the curves not only shift but become broader and their maxima decrease. They show a more familiar appearance. These calculations are very involved, however, A simple balance equation is shown to yield equivalent results, if a dimensionless characteristic number like the Nusselt number remains considerably smaller than one. This number contains an effective heat transfer coefficient between sample and furnace which, surprisingly, should not be too high. Apparently, the heat capacity of the pan does not play an important role under these conditions. This is investigated in Appendix II. Appendix I describes the procedure of the numerical simulations.     

Simultaneous determination of hydride (Se) and non-hydride-forming (Ca,Mg, K,P, S and Zn) elements in various beverages (beer,coffee, and milk), with minimum sample preparation,by ICP–AES and use of a dual-mode sample-introduction system

A method has been developed enabling direct analysis (i.e. after dilution only) of beer, instant coffee, milk, and milk powder by ICP–AES. Analysis of the beverages after dilution with a low concentration of HNO₃ was used for accurate determination of essential minor and trace elements (Ca, Mg, K, P, S, and Zn). Selenium, introduced as the hydride, was determined simultaneously with the other non-hydride-forming elements using the commercial multi-mode sample-introduction system (MSIS). To obtain accurate results, however, some simple pre-treatment was needed. Analysis was also performed after microwave-assisted decomposition of the samples. Three different modes of sample-preparation, i.e. dilution only, partial decomposition (aqua regia treatment), and complete decomposition were compared. The results obtained by use of the three different sample-preparation methods were in very good agreement. Results from analysis of certified reference material (SRM 1459 non-fat milk powder) also verified the accuracy of the methods. The limit of detection obtained for Se using dual-mode sample introduction was 0.5 ng mL^–1, which corresponds to approximately 2 ng g^–1 in beer and approximately 4 ng g^–1 in coffee and milk when using the recommended procedure.     

电喷雾解吸电离质谱法用于临床尿样的直接分析

将电喷雾解吸电离质谱(DESI-MS)用于临床尿样的分析, 优化了电喷雾溶剂流速、电喷雾电压和喷雾锥距离等重要参数. 采用普通滤纸作为样品载体, 在不需要样品预处理的前提下同时快速测定了临床尿样中的钾、钠、尿素、尿酸、丙酮酸和肌苷等多种成分, 并对各种成分的主要离子进行了串联质谱鉴定. DESI-MS在进行多组分同时测定时不需要进行样品预处理, 缩短了测定时间, 单个样品的分析时间不到1 min. 同时, 采用内标法对所测定组分进行了半定量分析.     

微克级介形虫壳体样品的多元素ICP－AES同时测定

本文从顺序扫描式双通道电感耦合等离子体原子发射光谱仪（ＩＣＰ－ＡＥＳ）的特点出发，对微克级介形虫壳体样品中的低含量元素选择最灵敏谱线和最佳通道，对各项条件进行最优化。Ｍｇ、Ｓｒ、Ｍｎ、Ｆｅ、Ｂａ、Ｚｎ的检测限分别为０．６～５．２μｇ／Ｌ，Ｃａ和Ｎａ的检测限分别为１６μｇ／Ｌ和５２μｇ／Ｌ，测定了微克级样品的多元素含量，回收率为９０％～１０６％。     

Sulfide Gels and Films: Products of Non-Oxide Gelation

The preparation of concentrated sols and transparent stiff gels of II-VI semiconductors nanocrystals is reported. A two-step process for the production of cadmium sulfide is reported. Sol stabilization and gelation control are achieved through successive passivation and depassivation of the surface of the nanocrystals which are complexed with thiols. The mechanisms driving the aggregation and the gelation are explained on the basis of NMR and SAXS experiments. Thin films as well as monoliths can be produced. The general principles of the method presented are not restricted to chalcogenide systems and thus enlarge the domain of application of the inorganic sol-gel process.     

废弃线路板化学分析采样、制样及检测方法

介绍废弃线路板中有回收价值元素和有害物质分析的采样、制样及检测技术。样品经过分类采样、剪切破碎和高温灰化制样,采用样品全分析或副批混合样分析。通过提高称样量、多次测定求平均值的办法,火试金富集-重量法测定贵金属金、银。湿法王水溶解样品,碘量法测定主体元素铜。电感耦合等离子体发射光谱(ICP-AES)法测定其它杂质元素,被测元素质量浓度在0~10μg/mL范围内与光谱强度呈良好线性关系,相关系数均大于0.9998。测定结果的相对标准偏差小于10%(n=5),加标回收率为97.0%~102.5%。该方法简单、快速,有效地解决了线路板样品不均匀而难采样,以及硬度、韧性强制样难,金属易包裹难分解的技术瓶颈,测定结果准确,具有代表性。该方法适用于废弃线路板化学成分分析,其它废弃电子产品检测可参考此方法。